Date: 2 Oct 2006 12:54:18 -0700 From: don.schencknospaml.com Subject: Re: '94 900S - How to remove dash
I can pull the radio without pulling the dash? Sweet. Time to break down and get that Haynes manual ... Thanks gang. -- Don - Bob - wrote: > On 29 Sep 2006 13:52:55 -0700, don.schencknospaml.com wrote: > > >NEVER MIND. > > > >Saabnet is my new friend! > > > > > I recommend you purchase a Haynes Manual to do this job. You will > still spend some time looking for all the screws. I forget how many > there are (9? 12?) but you have to locate them all. > > Onto more specifics > > - you can pull the SID and the radio without removing the dash as well > as just about everything else except the instrument cluster. > - the dash pull and re-install takes about 4 hours to do (consider > yourself warned :-). > - Put wire ties into the vents and around those little grids and tie > them tight at the top and bottom. Get it around the center/cross bar > and it will hold the assembly together.