Date: Wed, 30 May 2007 20:22:07 +1200
From: Richard Sutherland-Smith <richard.ssnospamr.net.nz>
Subject: Re: Saab 9000 rotor arm removal


> Hello > I've got a 1998 Saab 9000 that has done 110,000 miles. I bought a new > distributor cap, HT leads and rotor arm. I have replaced the cap and > leads, but I can't get the rotor arm off. Is it meant to just pull > off? The Haynes manual doesn't give any details. I have tried pulling > it off and I also tried levering it off with an old chisel and broke > the end of the chisel! You crush it! Then you glue the new one on. As the distributor only acts as a switch on these models, you don't get the wear from arcing as you used to do. -- Richard Sutherland-Smith 19 Webb Road, Wanganui 4500, NZ

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]