8. Position the drilling template inside the beam. Hold it against the swivel clamp and the inside of the beam.

9. Mark and drill the two fixing holes (3 mm dia.) in the upper part of the beam.

10. Enlarge the holes to 10 mm dia.

11. Elongate the holes with a rotary file forwards so that they are 10 X 15 mm.

12. Undo the screws for the lower ball joint. Fit the new longer screws with the screwheads towards the front of the wishbone.

Do not tighten the nuts

13. Remove the steering rack attachment screws and lift the steering rack upwards and forwards as far as possible.