NG900 & OG93 |
Vintage Models |
Clubs & SOC |
Other Cars |
Books Movies & Music |
Member Photo Galleries |
Member Directory |
What's New |
Photo of the Month |
|95 Bulletin Board|
I just did this on my 03 Arc, passenger side.
Driver and passenger side are different.
You need the oring and nozzle, and cover. I would also recommend getting an extra clip. They are small and it's easy to lose the one that comes with the replacement nozzle.
For my car, the parts were as follows, from eeuro
5492905 headlight Washer nozzle
5407614 headlight washer clip
I don't have a part number for the cover, but it probably is unpainted from Eeuro anyway and you might fare better at Goldwing for one that's already painted. Again, it's not the same number as the driver side in all likelihood. That said, if you get the nozzle back in place, the washer will function properly and you can just snap the cover on when you get it for the finished look.
Just to be clear, the part numbers above were for a 2003 9-5 Arc, Passenger side
->Posting last edited on Wed, 11 Jan 2017 17:08:09.
Posts in this Thread:
Post a Followup
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no Spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Contact | Site Donations | Other Sites by SP -
Poverty2Prosperity.org | RandomScreening.com
Your address is: 188.8.131.52 - Using CCBot/2.0 (http://commoncrawl.org/faq/) - Logged.