NG900 & OG93 |
Vintage Models |
Clubs & SOC |
Other Cars |
Books Movies & Music |
Member Photo Galleries |
Member Directory |
What's New |
Photo of the Month |
|95 Bulletin Board|
Well... the last 2 days things are better, but still not 100%. I suspect there must have been some air in the line after the core was replaced.. and it took a couple of day to work itself out? so it's definitely better, but not fixed completely.
I now get a good amount of heat if i set the temp to 'HI', or even using the 2nd highest setting (82 deg). The lower settings, however; have been erratic. Today I set it to 80.. and it was coming out cool/barely warm. but if i upped it to 82, it would produce hot air.
I'm wondering if the coolant bypass valve is simply sticking, as PME suggested.. and not opening all the way? or could there be a problem with the ACC controller..?
I don't think the stepping motors/flaps are an issue, as I've stated previously... as the air temp is the same from all the vents on both side, top and bottom..
Posts in this Thread:
Post a Followup
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no Spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Contact | Site Donations | Other Sites by SP -
Your address is: 188.8.131.52 - Using CCBot/2.0 (http://commoncrawl.org/faq/) - Logged.