NG900 & OG93 |
Vintage Models |
Clubs & SOC |
Other Cars |
Books Movies & Music |
Member Photo Galleries |
Member Directory |
What's New |
Photo of the Month |
|95 Bulletin Board|
Being that you have an 01 9-5 there is no occupancy sensor. There is a switch in the latch side (seat) of the belt buckle. Make sure it is plugged in under the seat. If you follow the wire from the latch there is a 2 pin connector sort of tucked up on the bottom side of the seat. From there the harness goes into the big connector for the seat. You can jump the connector on the harness side to check if the switch int he seat is faulty.
Another thing to check is the passenger side latch. It has the wiring but if it is plugged in the light will be lit. So make sure it is unplugged. I have seen this a few times when people think it somehow came unplugged and connect it. Good Luck, Bernie
George Riggin Specialty Automotive
1993 900 Conv.
2002 9-5 4 Door
2003 9-3 Conv. Viggen appearance package
2008 9-3 SS 4 door
Posts in this Thread:
Post a Followup
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no Spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Contact | Site Donations | Other Sites by SP -
Your address is: 184.108.40.206 - Using CCBot/2.0 (http://commoncrawl.org/faq/) - Logged.