1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: 8 Wire Plug Options Posted by Justin VanAbrahams [Email] (#32) [Profile/Gallery] (more from Justin VanAbrahams) on Tue, 3 Oct 2017 16:14:46 In Reply to: Re: 8 Wire Plug Options, Roger D [Profile/Gallery] , Tue, 3 Oct 2017 11:46:16 Members do not see ads below this line. - Help Keep This Site Online - Signup |
The part number I posted is the correct housing for connecting to the SaabGuard connector *and* the door lock relay connector - that is, in lieu of a SaabGuard or the door lock relay. I think it's used in only two or three places in a c900: On the actual SaabGuard wiring harness, on the seat side of power seat connectors, and *possibly* as part of the passive belt harness. It doesn't appear very often, usually where that housing would go is a device (like a SaabGuard or door lock relay), it's rarely used as a wire to wire connector.
If you have the housing, you can remove the terminals from it with most terminal release tools. In all the applications I've found, the terminals are double-barbed (they are available with single barbs, but I don't think Saab used them). If you don't have the double-barb release tool, you can release one side, rock the terminal sideways, then release the other. I didn't buy any from eeuro - I had salvaged all mine. *Next* time I do this, though, I'll have to buy one.
posted by 12.195.130...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.