1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Starter Update: Two issues fixed Posted by MJB [Email] (#2191) [Profile/Gallery] (more from MJB) on Fri, 10 Aug 2018 08:01:37 Members do not see ads below this line. - Help Keep This Site Online - Signup |
92t Conv. delayed start/no start issues resolved
After cleaning the ignition switch connections, removing
the shifter switch assembly and cleaning the brass bars back to a
shiny surface, I removed the negative ground to the engine. I couldn't
clean the bolt on the transmission case because of it's location(which was very dirty with grease etc and the bolt wouldn't come out because it hit the engine mount before clearing), I realized that the cable had enough slack that I could reinstall on a bolt higher up on the tranny case that was easy to polish the surface with a dremel. Cleaned the cable connection and applied a little dielectric grease.
That resolved the cold delay in start issue.
The no start once hot, that was the less than 12 month old starter.
My indy replaced it at no charge.
Thanks to everyone for their help in pointing me in the right direction.
MJB 92T 900Conv
98 9000 CSE
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.