1964-1974 [Subscribe to Daily Digest] |
My Sonett left drive shaft axle gear and hub gear teeth has complete worn out.
https://picasaweb.google.com/112913455203087371883/SonettFrontAxle#5968630672568149506
https://picasaweb.google.com/112913455203087371883/SonettFrontAxle#5968630676114334370
Can you guys please verify if I have the correct steps below and correct bolts to remove from the front axle assemble? I have never remove the drive shaft and according to this site the front suspension spring could be dangerous if not remove properly.
Steps
1. Jack up the car
2. Remove the front wheel.
3. Remove the brake calipers
4. Remove the Hub.
5. Compress the spring.
5. Remove the shock absorber at the bottom mount point.
6. Remove the lower ball joint securing bolt (one bolt). Please see picture and verify the correct bolt.
https://picasaweb.google.com/112913455203087371883/SonettFrontAxle#5968633236517322802
7. Remove the upper ball joint securing bolts (two bolts). Please see picture and verify the correct bolt.
https://picasaweb.google.com/112913455203087371883/SonettFrontAxle#5968633236517322802
8. Full the axle assembly out and collect the needle bearing out of the âTâ of the axle.
Thanks you.
KC Sonett
posted by 108.79.5...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.