The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 9/1 Photo of the Year Voting | 8/2 New Sponsor: Swedish Dynamics | 7/29 T-Shirts are In!


Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Photo Gallery for bobc


Bob Celestino | Tranny cooler bolts
tranny cooler bolts were not tightened at the factory, this shows itself as a small leak, at the front of the car.

This album contains 4 photos and 0 albums.



disconnect the AMM at the left side and intake at the right, this will give just a bit more room and bungee the PS hose out of your way too
Last modified: Feb 26, 2007


you can easily see the top banjo bolt.. 19mm box end will snug it up. if you squint you can barely see the lower one, glistening with with fresh oil.
Last modified: Feb 26, 2007


you can get a ratchet with a 19mm deep socket on the lower bolt. The socket ges on the bolt and the handle will clear the hose so you can turn it.
Last modified: Feb 26, 2007


upper and lower banjo bolts annotated.
Last modified: Feb 26, 2007


StateOfNine.com
Swedish Dynamics
SaabClub.com
Jak Stoll Performance
Button Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2022 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]