Date: Mon, 28 Feb 2000 09:16:57 -0800
From: "wgmoore" <>
Subject: Re: clutch master cyllinder for '85 900 turbo

I went to the trouble of removing the master and found it could be rebuilt leaving it in the car and only removing the cross pin that holds it to the pedal, and the snap ring that holds the guts inside the cyl. The hard part was getting it to bleed. but after it sat a day all was forgiven and it worked fine-but the trans is still bad- The price differance is $11.00 for the kit vrs $136.00 for a rebuilt master- gad do the math. J.D. <> wrote in message news:Lwdu4.7770$ > can these be rebuilt and how big a job is it to change?any advice would be > appreciated. > > >

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2018 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]