Date: Wed, 8 Mar 2000 22:31:06 -0700
From: "Sir Me" <c_a_nowellnopsamail.com>
Subject: Re: how to remove dash panel?


On mine, try removing the speaker grill on the dash of the driver side. The circuit board is flimsy plastic that can easily corrode. I just pushed it and prodded it a bit, and it seemed to solve my problems. stuku <stukunopsamdnet.att.net> wrote in message news:mqbw4.5116$vd7.213327nopsamsc04-news.ops.worldnet.att.net... > i've been advised to reset the contacts and check the ground on the m.i.u. > (main instument unit?) in my '95 900se. the temp gauge has been behaving > erratically. > > so how do i get to it? reaching it from underneath -- no way. it looks like > i can remove the panel covering the front of the dash. it seems held by two > screws adjacent to the steering wheel, plus two screws inside the instrument > cowl, and i've also found one screw behind the headlamp knob. are there more > fasteners to be found? this panel does not want to budge. > > appreciate any advice -- please help me get this thing off! > > stuart > >

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]