Date: Wed, 8 Mar 2000 12:17:38 -0000
From: "BarryG" <bgNOSPAMnopsamny.net>
Subject: Re: Brake rotors


(apologies if this gets posted twice) After reading the first 3 responses (thanks guys), I think I got hosed. I had asked about machining the rotors and they said they will never do that. The car has 101K miles and it was the front brake rotors. I might take it up with the service manager. Still would appreciate knowing the tolerance spec on the '94 front rotors if anyone out there has it. BTW - really, really love this car ;-) Thanks, Barry (to reply by email, please remove "NOSPAM" from my reply address bee gee at albany dot net) BarryG <bgNOSPAMnopsamny.net> wrote in message news:8a2pf8$rku$1nopsam.monmouth.com... > Brought my '94 900SE in to the dealer for just a muffler replacement and > next thing I know the service guy calls me back and is hitting me up for > $400+ for a rotor and pad replacement. On the phone he says there is 1/8 > inch gouges in the rotor surface (eek). I hesitate but say "okay, do it." > When I pick up the car, I ask to see the old rotors. They had very slight > surface irregularity if I ran my finger across them.

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]