Date: Mon, 06 Mar 2000 18:28:44 -0800
From: Eu <carlosarazevedoNOcaSPAMnopsam.telepac.pt.invalid>
Subject: Need help to fix electric window


My 9000 T16's driver's window doesn't budge from the closed position (luckly). The switch makes no effect as the motor doesn't run. I've disassembled the door panel and checked for voltage to the window motor, but there's none. It isn't a fuse problem since the passanger side window works. My alarm is rigged to the windows so that when I close the car with the remote it also closes the windows. I don't know if the alarm can cause this. I see two possibilities: either there's a broken circuit somewhere or the sensors that read the fully open and fully close position aren't working. Either way I need to know where is the central control unit for the window and if there's any (and where) electric plugs or devices between the control unit and the motor. Also would like to know where are the position sensors since I found no other wires coming from the window motor assembly. Thanks, Carlos A. R. Azevedo * Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *The fastest and easiest way to search and participate in Usenet - Free!

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]