Date: Fri, 19 Nov 2004 13:53:13 -0500
From: Fred W <Fred.Willsnospammyrealbox.com>
Subject: Re: C900 front rotor screw size?


Dave Hinz wrote: > A friend of mine just bought an '86 900, and it needs front rotors. Those > are on order, but I remember there's a torx-head screw holding the rotor > to the hub. Does anyone know what size torx bit he needs for that? > > Dave Hinz > Dave, Does it really matter? I mean, what your friend should probably be sizing is the drill bit he will need to drill off the head of the torx screw. It seems that every one I have come across, the screw material is so soft that the torx head strip out before the screw breaks loose, even after liberal application of PB Blaster. ...and NO! Do not heat that sucker with a torch. -Fred W

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]