Date: 18 Nov 2004 15:43:55 GMT
From: Dave Hinz <DaveHinznospamcop.net>
Subject: Re: Rotor removal


On 18 Nov 2004 07:19:15 -0800, Yaofeng <yaofengchennospaml.com> wrote: > > If you have removed the countersunk screw and the index screw on the > rotor, it should come right off. Bang it with a heavier hammer > cushioned by wood block. Or buy a really big "gear puller" from your local cheap tools distributor. I've used one of those on stuck rotors for years. Get a grip, locate the center on the end of the axle, and apply pull. While it's doing that, _then_ hit the rotor with your dead-blow hammer. The force, combined with the hammering, is your best bet. Oh, get a dead-blow hammer. Plastic faces, metal shot in head. Amplifies the blow without being so hard on your wheel bearings. Dave Hinz

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]