Date: 26 Nov 2004 20:16:16 GMT
From: Dave Hinz <DaveHinznospamcop.net>
Subject: Re: Saab 99 water pump thread?


On Fri, 26 Nov 2004 21:10:53 +0100, OKOK! <rootnospamlhost.not> wrote: >> > (Dave Hinz wrote) >> So at that diameter, the standard pitch is 1.25 then? How big of >> a shaft before the normal thread pitch goes to 1.5mm, do you know? > > That would be 10 mm. > Check here: http://www.simetric.co.uk/sispanner.htm Ah, very useful site, thank you much. >> Ah, a "turnbuckle" they call it here. They sell cheap aluminum ones >> here, and it's at least possible that they're imported and metric >> thread. Thanks for the thought. > > Helped me out after I broke the impeller using 2 screwdrivers ... :-( > The good thing is I bought a manual after that. *grin* See, the thing is, there are those two holes through the casting. Why they aren't tapped, for easier removal of the impeller, I can't imagine. Dave

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]