Date: Wed, 5 Oct 2005 23:17:56 +0100
From: NeedforSwede2 <carl.robsonnospamcing-czechs.com>
Subject: Re: Clutch pedal free play C900...


In article <4343cd38$0$30311$da0feed9nospam.zen.co.uk>, grunffnospam.com says... >NeedforSwede2 wrote: > >> Didn't want to consider a worn pin the linkage as UK cars "Swap across" >> under the dash using rod. > > >Doesn't really make it much harder to fix. The master cylinder 'pin' is >dead easy to replace, and the other bit (that's part of the linkage) can >be welded in-situ. I did this on one of my early 900s, and it worked >very well. > >But definitely try bleeding it first - that's far more likely. > > > Don't worry, will try the bleed first. -- Carl Robson Car PC Build starts again. http://smallr.com/rz Homepage: http://www.bouncing-czechs.com

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]