Date: Fri, 06 Oct 2006 19:55:01 GMT
From: krhodesnospamam.maine.rr.com (Kevin Rhodes)
Subject: Re: Getting ready to buy a SAAB


In article <CsWdnSOg0u8eDbjYnZ2dnUVZ_tqdnZ2dnospamast.com>, "Richard Sauer" <chongkilnospamast.net> wrote: >Hello, > >I've never owned a SAAB..never even driven one. Tomorrow I'll test drive a >2000 9-5 (V6 3L) with 82000 miles on it. The dealer claims it is still under >warranty?? I've read about all the reliability issues with SAABs, but I >think I'd like to boldy go where I have not gone before- >Some cars I've owned: a 81 Mark VI Lincoln (timing chain busted while >driving on a remote highway in the Northern Cascades), and 86 Cadillac >Seville (sofa on wheels), 93 Buick Le Sabre ( see previous entry), Toyota >Corolla (more problems than I expected) ....So I'm ready for a different >driving experience..and maintenance experience. Looking forward to the >test drive... > >Rich > I have the same car - 2000 9-5 SE V6t. Mine happens to be a station wagon. It is a fabulous car. DO NOT listen to the boneheads who will tell you to avoid the V6. It is actually a MUCH more reliable engine than the 2.3L 4. Also FAR smoother and more powerful at low speeds. Fuel economy is quite good, I get 24mpg in my suburban commute, close to 30 on a long tip. The problem with the 4 is the major sludge issues. If a 4 was maintained by the "book" as Saab recommended in the early years of 9-5s, it will almost certainly have a sludge issue - the oil change intervals were simply far soo long, and they are now on version #6 (!) of the PPCV system. As to the V6. Make sure the timing belt AND THE TENSIONER pulleys were replaced at 60K miles. Saab pays for the first timing belt change, but they do not pay for the tenshioner, so often people don't change it. They fairly frequently fail before 120K. If you can't document both the belt and tensioner having been replaced, do it now. Better yet, get the vendor to do it as part of the sale. Cost me about $500 for both at a good independent garage. Was cheaper to have the whole thing done at my favorite independent than to have the $tealership do the "free" belt and pay them to change the tensioner. Use synthetic oil. I change it at 7500 mile intervals. While the V6 is not prone to sludge issues, the turbo will live longer with synthetic. Remember, 2turbos are a wear part, they do not last forever. Other specific to V6 issues - there is an O-ring where the oil filter mounts on the non-turbo version of the engine. This will turn into dust and start leaking. Cossts ~$2.50 and took me 30 minutes to change. The thermostat is expensive and hard to get to, so change the coolant on schedule and use the corrrect Saab coolant to prolong its life. That's about it. Unusually, IMHO the V6 is easier to work on than the 4, it actually has more room around it in the engine bay. Also, you can often get parts for it MUCH cheaper from a Saturn dealer than a Saab dealer, as the same engine sans tubo was used in the Saturn LS. I bought mine with 41K on it two years ago, now at 67K. Only issues have been the O-ring and the pixels starting to fail in the SID display. Fixed both myself. Otherwise just routine service items. I did pre-emptively change the crank sensor and the heater valve. Those are both common 9-5 issues for both V6 and 4 cylinder cars. Kevin Rhodes Westbrook, Maine '00 9-5 SE V6t Wagon 'WASAABI' '92 C900T Convertable 'SUNSAAB' '91 BMW 318is '74 Triumph Spitfire

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]