Date: 12 Feb 2007 12:53:37 -0800
From: "Don" <w9cwnospamo.com>
Subject: CIS Injection Cold Start Injector Seals



I have an '85 900 8-valve which uses the Bosch CIS injection.  The
fuel delivery banjo fitting that's on top of the Cold Start Injector,
aka Cold Start Valve is leaking fuel.  The cause is deterioration of
the rubber in the washer/seals on mounted at the top and bottom of the
banjo fitting.

Does anyone know of a source of these seals? No luck with my local
dealer, and thesaabsite.com - at least so far.

Thanks,
Don

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2008 - The Saab Network - saabnet.com. Mass downloading portions of this site (bandwidth abuse) is not permitted and will result in immediate and permanent restricted access. For usage guidelines, see the Saabnet.com Mission and Purpose Page. Site Donations