Date: Sat, 04 Jul 1998 02:36:31 GMT From: <montomnopsamnt.ca> wrote: >When you pres the gas to go over 3000 rpm and release the engine >stalls. If you break with the engine and rpm goes to about 2000 and >then press the clutch it is OK. The idle fluctuates between 900 nad >1000 all the time. I cleaned the idle control valve from the residudes >- it helped. Before it always stalled when rpms were going down to >idle. There is no problem with restarting it, though. Any ideas of what >else I should be looking at? > >Please respond to the group and e-mail address. > >Thanx