Date: Sun, 11 Oct 1998 03:37:49 -0700 From: Justin VanAbrahams <jvanabranopsamnet> Subject: Re: 900 turbo water pump
hip82(nospam)nopsamo.com wrote: > > I have a '87 900 turbo that needs a new water pump. Seems pretty straightforward. Any tricks or hints out there? > > Tom It's easiest, from my experience, to remove the a/c compressor & bracket when doing the water pump. You don't have to, but it helps a LOT. The hardest part is getting the a/c bracket loosened up, but this will facilitate loosening the alternator and getting the belts off. Just be sure to have a new thermostat, fan thermoswitch, and gasket on hand. You don't have to replace the switches, but as long as everything is out, it's a good time to replace them. Also take note of the bleeder valve at the top of the head - be sure to open it and be SURE your temperature control knob in the cabin is on "hot" when draining and refilling. Good luck... -Justin