Date: Fri, 04 Dec 1998 10:55:57 -0700
From: William Ward <wwnopsam.gov>
Subject: Re: 3 wire O2 sensor alternatives?


Vance Harlow wrote: > Need a new O2 sensor - 3 wire - for my '89. Last time I was looking, there > were tons of universal ones around (you had the crimp the old harness on) > and I got a Bosch universal for around $40. Now I am told Bosch doesn't > make a universal, and 3 stores have told me no one else does, and that my > only choice is to pay $185 for a SAAB-specific (the one with the harness > crimped on already) one. > I got my 3-wire for an '88 900T from Autozone. I just told them to look up a Mustang, though you need to go newer to get the 3-wire, maybe 1990+. It was cheap, under $40 if I remember right. Bosch makes *all* the O2 sensors, as far as I know, for American and European models. They're virtually all the same except for the connectors that you'll clip off, except some weird ones that may be 2-wire, with combined grounds. Choose the one with the longest wires on it so that your splices will be made away from the manifold heat. Bill Ward

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]