The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!
Date: Thu, 04 Feb 1999 12:39:17 +0100
From: RCS <e9225126nopsam1.tuwien.ac.at>
Subject: Re: Windshield wiper fliud pump


Sometimes thereīs another thing too: The contact of the wiper switch (pull) is corroded. The windscreeen wipers are moving, cause they are operated by an "amplified triggered" relay but the fluid pump is directly connected by the switch. So it needs some [mV] to operate the wipers but the current canīt be drawn over the switch for the pump! Check that too! - Good luck, RCS! - Jeff Trent wrote: > I am perplexed. The pump is not working as connected, but when I hook the > leads directly to the battery, no problem. I did take a voltmeter test on > the plug harness supplying the power. Sure enough when I activated the pump > switch lever from inside the cabin, I get about 12 volts. How could I be > getting a charge here, know my pump is working, yet continue to have the > pump not operate when connected? Appreciate any insight. TIA! > > -- > Jeff Trent > Portland, ME > 89 9000 Turbo > jefftrentnopsamdnet.att.net

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]