Date: Mon, 22 Mar 1999 09:47:58 -0800 From: Justin VanAbrahams <jvanabranopsamel.net> Subject: Re: Vacuum hoses and high idle
> Adam wrote in message <36EDB936.3C7Bnopsamplus.com>... > > > >The car runs fine, but now idles very high, at about 1400 rpm. The > >other problem is that there were a few vacuum lines completely broken. > >These lead into a canister on the drivers side fender. There are many > >lines that lead there but I'm not sure which goes where. I looked in > >the Haynes manual and can't find any schematic for vacuum hose routing. > >What does this canister do, and how do I go about replacing the lines to > >the right spot? Thanks to everyone in advance for any help avaiable. > > > >Adam The cannister is your charcoal cannister - for fuel vapor recapture. There are two hoses running into it, one which comes from the rear of the car and should be plastic fuel line, the other is going to be rubber and will go to the throttlebody. -Justin