Date: Sun, 04 Apr 1999 23:07:42 GMT From: tnopsamkson.edu (Taufan Tjioe) Subject: Re: Fog (Driving)Light Replacement on '96 900S
Point your favorite web browser to: http://www.townsendimports.com/electrical_system_folder/newgenfoglightbulb.htm Apparently this new procedure which can be done on 96- 900s, takes about 5 minutes to do....the older new-gen 900s still have to have part of the air dam removed. You have to have a torx screwdriver too. Lots of other usefull information on that site too.. Best of Luck, Taufan tnopsamkson.edu On 4 Apr 1999 17:40:34 GMT, hjerhardtnopsamcom (Hjerhardt) wrote: >Can someone tell me the easy way to change the drivers side fog light on my 96 >900S. I had to remove two panels and take out the windsheld washer pump from >below, just to gain access to the bottom of the lamp housing. Removing the two >screws in front (on the lamp housing) is worthless because there is a third >beneath the front grill. Once I got to it, it took an hour of precise mount >with needle nose pliers to get the new bulb in. This episode is changing my >opinion of Saab engineering.... > >Herb