Date: Fri, 14 May 1999 03:51:47 GMT
From: (Eoin)
Subject: Re: boosting the apc

There is an excellent discussion of the three potentiometers (pots) that control boost in your series 900 on the Saab Network's bulletin board. Go to: Look in the past postings for "APC, Theory and Tweaking" posted by Kevin K on 5/09/99. It will tell you what you want to know in detail. You should NOT use the P screw as the primary boost adjustment. You should primarily use the F screw, and then the P as a fine tune. Kevin explains all the ramifications in the post. It'll be well worth your while to read. HTH On Thu, 13 May 1999 15:23:42 GMT, (B Palmer) wrote: >There are three adjustable screws on my apc (900 16v/t 1987). Turning >the one marked 'P' through about 90 degrees clockwise increases turbo >boost - but what are the drawbacks? ...and how far can it go? Mine was >set at about 1-0-clock, and I've turned it forward to about 5-o-clock. > >Comments appreciated. > >Best > >Bryan Palmer Addressable as Bullwinkle in the commercial domain of mostlysunny

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]