Date: Tue, 8 Jun 1999 20:28:37 +0100 From: "Michael Arnold" <Michael.Arnold2nopsamin.net> Subject: Re: Knocking sound on 900i 16
Hello Jan, It sounds as though you have located the noise in the overhead cam shaft area, if this is so and you have found that one valve seems to be loose then I would suspect that the pallet that is between the cam and the valve tip is seriously worn. Removing the cam shaft isn't too difficult if you have engineering know-how. Also, in doing this job you will be able to check out the cam chain and tensioner. Good luck, Mike. Jan Kannemacher wrote in message <3756C5F0.2BEC24C2nopsamk.de>... > >Sounds like a new trace. After I've rattled with some tools today to check into >the valve compartment I found at least something that COULD be the reason. >Unfortunately it exceeds my technical English, but I'll give it a shot. The >opening element (however it is called) of the second cylinder's first intake >valve does not sit as tight as the other ones. Now there's another question. > >How much work is it to replace this thing...and if I don't, what can happen? >(Based on the thought that this is my culprit.) > > > > > >JK'99 >