Date: Thu, 01 Jul 1999 15:57:37 GMT
From: (Michael)
Subject: Replacing Front Pads -87 900T

Offered to do my friend a favor by replacing the front pads on his 1987 900T. Appears that the emergency brake cable was sticking and maintained pressure on the right front, wearing down the pads. Question: when collapsing the piston to insert new pads, I do not get enough clearance. All I suceed in doing is moving the piston from end to end. Is there an adjuster screw somewhere I can back-off that mechanically expands/retracts piston . Also, am I required to remove caliper assy from knuckle to do this. Trying to avoid buying a manual. Thanks in advance. Mike 88 9000T

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]