Date: Tue, 27 Jul 1999 09:03:16 -0500 From: djpark7nopsamail.com (Dennis Park) Subject: Re: 91 9000 DCComputer Light
There is quite a few screws that must be removed. The Haynes manual is correct that the upper facia must be removed to access the panel lights. When it mentions applying gentle pressure to the rear, it is refering to the upper facia AFTER all the screws have been removed. Basically some screws behind the speaker panels and one in the glovebox needs to be removed. If you go to www.townsendimports.com and look in their technical documents section, there should be a fairly detialed walk-through of the process. Shouldn't take you more than an hour. I replaced several bulbs when I bought mine 1 1/2 years ago. Happy SAABing. Dennis Park '87 SAAB 9000S In article <3799DF85.2D36nopsamstunas.org>, ttruebnopsamstunas.org wrote: <>< Not sure if I've asked this, but still looking for an answer. The light <>< on my DCC went out. I'm pretty sure it's a backlight, because all the <>< colors and info are present when lit from the front (eg driving away <>< from evening sun). Can this be popped out from the dash or do I have to <>< remove the facia? In the Haynes manual it says (after the upper facia <>< is removed) to "apply gentle pressure to the rear" to remove it. Can <>< anyone tell me if I can just pry it out from the front? BTDT? Thanks, <>< Tom <>< SDG <><
 |
 |
 |
 |
 |
