Date: 25 Oct 1999 17:03:20 GMT From: Dave Wysocki <dwysockinopsampc.com> Subject: Re: 88 900T Interior Lights
Sounds like the fuse for these bulbs is almost open - it might look ok by visual inspection, but it would measure as a high resistance (> 1 ohm). Message by Dick Andersen <dickanopsamnet> on: 10/24/99 12:12:48 AM >The interior lights don't work on my wife's 88 900 Turbo when she opens the >door or hits the switch on the console. > >The bulbs check out good. > >When I open the door there is 12volts across the bulb socket with the bulb >out, when I put the bulb in the voltage drops to less than 1volt. Then, if I >pull the bulb out, the voltage stays at 1volt for about 30 seconds and then >comes back to 12volts. > >I've tryed bypassing the console switch but I still get the same result. > >Any suggestions to get them working? > >Dick > > >
 |
 |
 |
 |
 |
