Date: Mon, 20 Dec 1999 21:42:18 -0500 From: Four Weis <mweinopsamcom> Subject: Re: ?Both sides windshield washer broken?
I am guessing that Saab did not change this from the earlier models. They have a pressure valve just before the spray nozzles. The concept here is to spray only when sufficient pressure is present. This valve could be clogged or your pump is not putting out enough pressure. This should be documented in your owner's manual, it was in mine. bagofchipsnopsameja.com wrote: > So the washer on my 95 900S is not working. The pump motor is clearly > engaging when the button is pressed, reservoir has fluid. A pin to the > nozzles achieves nothing, and both sides are emitting anything at all. > Before I go looking throughout the washer system tubing for a clog... > is there anything else I should think about, something else i should > consider or a place I should look first? > > Thx, > > BC > > Sent via Deja.com http://www.deja.com/ > Before you buy.
 |
 |
 |
 |
 |
