Date: Thu, 6 Jan 2000 18:17:49 -0000 From: "Ralphie" <davenopsam.freeserve.co.uk> Subject: Re: Climate control 93 9000CSE
hi Rich I have the same system and you have press and hold the top and bottom buttons together for a second then release them hope this helps regards ralphie Rich Maurin <rich_maurinnopsaml.msn.com> wrote in message news:uLvGWFyV$GA.250nopsamnbbsa02... > Hi, > > I am having a problem with the climate control in my 93 9000CSE. As I > was driving home this afternoon, the fan decided to start running at high > speed. The only way to stop it was to raise the temperature to ~80 degrees > F. As the fan kicked into high, the air conditioner kicked in. Since the > system was on AUTO, it decided that the interior was to hot, and that it > should cool things down. > > I read in the owners manual and it talked about a recalibration > procedure. This procedure should be performed if the car looses electrical > power, i.e. battery. I did replace the battery a few days ago. It states > that you should push the AUTO + <=> buttons simultaneously. The procedure > checks the system and displays an error code in the temp window if one is > found. It also checks the functions associated with the buttons on the right > hand side of the panel. I need to know how to start the procedure. Pressing > the AUTO + <=> buttons does not do anything in my car. Am I doing something > wrong, are the instructions for the procedure incorrect, or is my control > panel to blame. > > Thank you > Rich Maurin > >