Date: 18 Jan 2000 21:25:02 -0500 From: kenbellnopsamx.com (Ken Bell) Subject: Re: '88 9000 Blower Fan on Full
[Posted and emailed] In article <04d17460.92b6c4bfnopsamex0107-042.remarq.com>, JeffA <jeff.antramNOjeSPAMnopsamin.net.invalid> wrote: > >My 1988 9000i (no A/C) blower will only operate on maximum power. > >Looking at the wiring schematic, this problem looks to be caused by a >faulty resitor pack. > >My problem is now :- "Where is the blower resitor pack?" > >I've looked close to the switch by removing the glove box interior but >found nothing. > >I've look under the bonnet and around the blower, but not found >anything either. > >Now I'm assuming that I will have to remove the blower itself (?) to >get at the pack. > >Can anyone tell me where to find this part and how to get access to it >please? I think it's accessible after removing the plastic over the "false bulkhead" on top of the "firewall" on the passenger side. You may have to remove some other stuff too, and as I recall reading, care must be taken when working with a good resistor pack (e.g., when you install the replacement) so as to not short and destroy it in the process. Find yourself the relevent Saab manual section and read it carefully, or maybe you can find the procedure on Townsend Motors website (which for some reason I can't find right now, I think it was www.townsendmotors.com). -- Ken Bell :: kenbellnopsamx.com :: (212) 475-4976 (voice)
 |
 |
 |
 |
 |
