Date: Sat, 29 Jan 2000 08:53:21 -0500 From: Chris Thurrott <dontsendnopsamspam.tome> Subject: Re: '96 900S Side Mirror Assembly
The mirror actually snaps on and off the ring. It is a bit tricky, but you should be able to get the mirror off so that you can get at the screws. Be careful not to break the little plastic tabs that run from the motor to the GEH ring. If you do you are looking at a new motor for $100+ Don't ask me how I know 8-) -C -- **** Note our new e-mail addresses **** This message was sent by either: Chris Thurrott - wodin at worldnet.att.com **OR** Kris D'Anci - lokki at worldnet.att.com > From: robertk464nopsamcom (RobertK464) > Organization: AOL http://www.aol.com > Newsgroups: alt.autos.saab > Date: 25 Jan 2000 06:42:08 GMT > Subject: '96 900S Side Mirror Assembly > > I caught my passenger side mirror on the side of the garage door. It broke > the > GEH Ring (part #6 in the assembly diagram). The back assembly unfastens quite > easily with the push of a tab, but I cannot firgure out how to get to the four > screws which fasten on the GEH ring. The mirror blocks the screws. Can > anyone > tell me how to go about this? > > Bob Knight > robertk464nopsamcom