Date: Sun, 05 Mar 2000 10:18:31 GMT From: tonynopsamkar.demon.co.uk (Tony Standish) Subject: Re: 900s clutch hydraulic bleeding. Needs HELP.
check feed hole at bottom of resovoir is clear , they come from factory blocked on purpose so that they can be used on automatic cars aswell. Just pull off clutch massy feed pipe and fluid should flow freely. hope this helps. PS. you also need to pressure bleed not just by pumping with the pedal,email me if you need more help. tonynopsamkar.co.uk >Today, I was trying to bleed the hydraulic system of clutch which came >out to be a sad result. > >I repeated the procedure "opening the bleeding nipple when my friend is >pressing the clutch pedal, let it bleed and close the nipple." about >4times. After several times it became to bleed non, no fluid. It >seemed like no fluid in the system. Of cource the clutch has no >response. Then, I thought the brake fluid reservoir would be empty, but >it was nearly full. So, now I have a question, is there clutch fluid >reservoir different from one for brake or is there any other failure in >the system (Master cylinder)? Please helpe me out if you have any idea. > > >Thanks, > >Simon