Date: Sun, 19 Mar 2000 19:08:42 -0800 From: TimeRangernopsam.com Subject: Re: Front Brake Pads
On Sun, 19 Mar 2000 16:39:45 -0500, JPM <jeff95pgtnopsamail.com> wrote: >I have the front brake pads removed, but do not have enough clearance to >install the new outboard pad. I have screwed in the piston and have >enough room to install the inboard pad. Any suggestions would be >helpful! > >1986 900 Turbo You need to compress the piston even further. I usually use a large pair of Channel Locks or even a "C" clamp will work. -- "Our eyes and hands and feet will give us the same assistance in doing mischief as in doing good; but it would not therefore be better for the world, that all mankind were blind and lame. Arms are not to be laid aside by honest men, because carried by assassins and ruffians; they are to be used the rather for this very reason." -George Campbell (1719-1796)
 |
 |
 |
 |
 |
