Date: Thu, 13 Apr 2000 20:15:58 GMT
From: Porsche_S2 <mavallarinonopsameja.com>
Subject: Re: 900s radio wiring help


I am affraid that it would need to be a custom job. Does Clarion make the head unit for the 900 SE? I would like to find out the manufacture and ask for the schematic of the patch cable. Then I could actually make one myself from Radio Shack parts. All I really need is the line- out signal from the patch cable. The rest; Power, ingnition etc, I could hard wire if needed. I just need to know where and what the pins are doing. What speakers (size, special mounting etc...). Thank all; you have all been helpful. MV In article <20000412181453.27796.00001021nopsame1.aol.com>, pdgpjhnopsamcomspamthis (Paul G) wrote: > Easiest way to add an extra amp is to get a new head unit with RCA pre-outs. I > haven't heard of any y-connector, since all of your power and all speaker > channels run through the cable. Maybe there is something out there I don't > know about.? > > Paul > (Remove "spamthis" to reply) > Sent via Deja.com http://www.deja.com/ Before you buy.

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]