Date: Thu, 22 Jun 2000 20:53:10 GMT From: "Ask The MasterTech" <Tsykesnopsamd.rr.com> Subject: Re: 9000 dash light
Hi Matt, This is the EDU display and no it is no difficult to replace these bulbs. In-order to replace them, remove both speaker grilles, then remove the 8mm bolt that secures the dash pad on each side and the 2 screws that secures each side, the one screw that is hard to find is just infront of the instrument cluster and to the right(it goes up into the dash pad) and remove the one screw in the glove box face (left upper face of the glove box when the box door is opened Should be a gold screw) take off the dash pad and pull up the entire cluster being careful not to lose to rubber pieces that keep the cluster from moving they are located on the bottom legs of the cluster. The edu and bulbs can be replaced from the back. Hopefully this will help! Also, Attached is a link that has answers to Frequently asked Questions about the 9000(the Second link). hopefully this will help! TW http://www.thesaabsite.com "RISONG" <risongnopsamcom> wrote in message news:20000622092148.02961.00002981nopsamg1.aol.com... > After seeing threads on changing the bulbs in a 900, it made me want to inquire > about light in my 1988 9000. On the info guage, where it states the gas > mileage, outside temperature,etc. I can faintly see the numbers, but for the > most part, it's black. It used to work. Is this a problem to replace the > bulb? > > Thanks > Matt > 1988 9000 > 1987 900T > 1985 900S