Date: Tue, 27 Jun 2000 13:55:56 GMT From: remco <remcownopsameja.com> Subject: Re: loud CLUNK on 96 900SE under braking
On my '84 900S I had something similar happen: one of the holes that mount the rear brake was worn such that it became elongated - so the brake assembly was able to move back and forth when breaking hard enough. Hope you find your problem. remco In article <wzM55.10$4h3.1264nopsamoon.columbus.rr.com>, "Keith Grider" <keithnopsamhallidaytech.com> wrote: > group, > > I have a 96 900 se with 45kmi. I have had it 6 wk, and all is well except > when I brake really hard (enough to cause operation of the ABS on dry > pavement), I hear a loud clunk on the right front (I think). The car tracks > straight, turns the same side to side, and there is no evidence of body or > suspension repair on either side. I thought this may be the RF strut, but it > is tight. Any ideas? > > Thanks, > > Keith > > -- > Keith Grider > Halliday Technologies Inc. > (remove HATS from email address for reply) > > Sent via Deja.com http://www.deja.com/ Before you buy.