The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!
Date: Tue, 04 Jul 2000 12:57:12 GMT
From: "Rick" <e-johnstonnopsamaone.net>
Subject: Clutch - 87 9K


Greetings all - I've looked and looked... but can't seem to locate information regarding how to adjust the hydraulic clutch. I know I have done it before, but maybe there is more wrong now... The rubber clutch line blew off the metal line (bad connector) I fixed this and attempted to bleed the line by pumping the clutch, holding it down, and releasing the bleed screw. Nothing happens, so... Then I connected a vacuum pump to the bleed screw, and sucked away, nothing. My next test was to remove the Master clutch cylinder (the one the pedal is attached to, and play with it). I say play with it because I am not sure how it is suppose to work but, as much as I pump it, it will not pull fluid from a hose going to the brake res. I would assume I have a bad Master clutch cylinder. Could anyone point me to the proper clutch adjustment information? Thanks in advance! Eric - In NH. "87 Saab 9000 - Golden Retriever - boat for sale

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]