Date: Wed, 30 Aug 2000 07:11:04 -0500 From: Tom Trueb <ttruebnopsamonline.net> Subject: Re: 9000 EDU (0/1)
I was able to replace mine by just popping the unit out without removing the dash. Start with the ashtray, stereo, etc., until you can reach behind the EDU. Then split the EDU, and you can remove the lamps from the back (didn't have to take the front apart like I did). Tom TSG wrote: > Yup, burned out bulbs. The same with me. > > Here's the schematic about how to replace the bulbs -- not the easiest > task since you have to remove the dashboard, but doable. > > You'll need a Phillips screwdriver and a Torx set.... > > Good luck. > > TSG > Seattle > > On Tue, 29 Aug 2000 07:06:00 -0500, Tom Trueb <ttruebnopsamonline.net> > wrote: > > >lamps burnt out. it takes two little halogen bubs. > > > >alex carruthers wrote: > > > >> hi > >> > >> the EDU in my 91 9000 stopped displaying. > >> > >> but in the correct sunlight angle one can see that it's still > >> functioning - just 'masked' > >> > >> any idea what it would take to remove the masking? > >> > >> thx > >> > >> Alex C