 |
|
|
Date: Tue, 14 Nov 2000 17:40:30 +0100 From: Robert Anders <robert.andersnopsamnet.uni-hamburg.de> Subject: Re: Question about trip computer display
On Tue, 14 Nov 2000 07:17:33 -0600, "Howard Bell" <hsbellnopsamt.net> wrote: >Can >this light be replaced? If so, how? Thanks. Sure. There are two lights 1,2W 12V. Remove the lining* of the two cross-beams* beside the front window. Now remove the speaker dash housing (3 screws, two on the side (open the door) and a small one on the top). Now you'll find a nut on each side, remove them (Not the nuts holding the speaker itself). Now you have to remove some screws which are holding the large lining* covering the whole cockpit. One at each side where the speaker dash housing was fixed, one is placed at the instruments right at the steering wheel (look _under_ the lining), and one behind the door of the glove drawer*. Now remove the large lining* and you'll find the main instrument(s) (only one, large instrument) which is fixed with two screws at the top. Now you can lift the instrument and replace the lamps ( use tweezers*). But watch these cables! You don't have to remove them. Turn the lamps anticlockwise and replace them. Sorry for my denglish <g>, its rusted*. Words marked with * are translated by altavista, so it may be nonsense. best regards, Robert
 |
 |
 |
 |
 |
