Date: Thu, 23 Nov 2000 18:32:56 -0800 From: "Matt Wilson" <wilson55Xnopsamll.net> Subject: Re: FPR vacuum hose: Where does it go?
Wait a sec, are you talking about the capped line on the throttle body, NOT the intake manifold? I also have a capped line on my throttle body (the round section prior to the intake manifold), this is normal. I'm pretty sure that the capped line on the throttle body doesn't provide the necessary vacuum.. "Tom Young" <teyoungSPAMnopsam.com> wrote in message news:dlhT5.461885$i5.8108611nopsam1.frmt1.sfba.home.com... > Thanks, Matt. The only spare vacuum nipple on the manifold had been capped > for some reason, but I went ahead and used it. I don't notice any > performance changes, but at least it's good to know it's in the right place. > > Tom Young > > > "Matt Wilson" <wilson55Xnopsamll.net> wrote in message > news:hsaT5.1133$V62.245628nopsam1.sbc.net... > | Yes, 3.0 bar is correct for the S. The Turbo models got the 2.5 bar. > | > | Connect it to manifold vacuum. There should be a "T" somewhere on the > intake > | manifold that has a free nipple. On my '90 turbo it routes to one on the > top > | of the manifold. Note: there are also spots on the side of the manifold > | where it may hook to. > | > | > | "Tom Young" <teyoungSPAMnopsam.com> wrote in message > | news:qeXS5.458667$i5.8001099nopsam1.frmt1.sfba.home.com... > | > Hi group: > | > > | > I just bought my first Saab last Thursday, a '90 900S. I'm pretty > thrilled > | > about it. > | > > | > I was poking around and noticed that the vacuum line from the FPR isn't > | > connected to anything -- except the FPR. It's just dangling there. Does > | > anyone know what it's supposed to connect to? If you don't mind, please > be > | > as descriptive as possible (I don't have a repair manual yet). > | > > | > Also, it's a 3.0 bar unit. Is that appropriate for my engine? > | > > | > Thanks! > | > > | > Tom Young > | > > | > > | > > | > | > > >
 |
 |
 |
 |
 |
