Date: Sun, 29 Apr 2001 13:33:17 -0500 From: bogartnopsamurytel.net (Lloyd Bogart) Subject: Re: need Clarion reset help '89
Many thanks, Robin In article <3AEC5819.285211E6nopsamatico.ca>, Robin Moore <robin.moorenopsamatico.ca> wrote: > Lloyd, > > My (92) manual has the following instructions. I assume yours would > work the same way. You have to have the radio power on for an hour > before it will work. > > Turn the ignition to accessory. > Turn the radio on. > Wait at least an hour. (It says turbo radios will beep all through this > period). > After an hour, press and hold the BAND switch until "CODE" is displayed. > > Enter the code as usual. > > At this point only one attempt is allowed, so if you blow it you have to > start again and wait another hour. > > Good luck. > > > > > Lloyd Bogart wrote: > > > OK, I've forgotten the secret handshake, and don't have > > a radio owner's manual. Who can help? It's an '89 SPG > > Clarion radio (the kind with the blinky red light), model > > PU9206BA > > > > The battery died, and after replacement, I managed > > to key in the *wrong* anti-theft code. I have the correct > > code, but now the *wrong* one shows every time I > > turn on the radio, and ....well, you know. > > > > I pulled the radio (something in my murky memory > > sez it has to be off power now for a couple of hours?) > > Sheesh, and I've *done* this before , too. > > > > Anyhow, while I'm waiting, can someone tell me the > > answer (and I promise to write it down this time). > > > > A copy to my email would be appreciated. > > > > tnx > > > > Lloyd > > ****