Date: Sat, 28 Apr 2001 07:54:38 +0100 From: "Carl" <dontspam_cjpnopsamorld.com> Subject: Re: Can I hook an amplifier into the SAAB radio?
Yes it's low level output. There is a common ground for all four speakers - available on Pin2. The biggest problem with the 8-pin Din connector is the Amp on signal, it's only 5v - this won't turn on most amplifiers, just use the aerial output instead. Have a look at: http://www.saabnet.com/sites/richard.bevan for more details. Carl. -- To reply, remove "dontspam_" from return address. Mitch Copperfield <nospamnopsamam.net> wrote in message news:smsG6.9$nQ4.8808nopsam0.chicago.il.ameritech.net... > Twice tried to connect an amplifier to the Saab radio > in a 1996 900S but I failed. > > I tried to use the 8 pin DIN plug (assume it's a low level output) > from the radio to the amp, but this doesn't work because > the pins for the negative side of the right and rear speakers are > missing. > > Has anybody been able to hook up an amplifier to the Saab > factory radio successfully? If so, do you mind sharing how > did you do it? > > thanks. > > goldvatameritechdotnet > >
 |
 |
 |
 |
 |
