The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!
Date: Tue, 26 Jun 2001 11:55:11 -0600
From: "Charles Stoyer" <cstoyernopsamrpex.com>
Subject: Re: air in Clutch hydraulic system


To bleed a 900 clutch, you must apply pressure to the fluid reservoir. The clutch cannot be bled by doing the old "in-out, in-out" as is done with the brakes and other clutches. Not sure why. Charles. cs <nopsamdnet.att.net> wrote in message <51ogjto07ruai6ghgtqqsau89kr18rlprrnopsamcom>... >I have had to lift up the clutch pedal on my '88 9kt for several >weeks. Finally got the time to pull the master cylinder, clean it out >(was not scored), reassemble, but can not bleed the system, as the air >bubbles just keep coming (so far, I have added over a pint of Castrol >b. fluid to the resovoir). The brakes remain strong. > >What am I doing wrong, what could be wrong? If brakes are good, does >that rule out the pump?

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]