Date: Fri, 03 Aug 2001 19:51:54 GMT
From: "Familjen Dahlberg" <>
Subject: SV: Help! Getting Check engine light on 900T16 after changing Dump valve!

I would try what we here in Sweden call a "Norwegian reset". It just means lifting the +power cable from the battery for a while. Connect again and see if something¥s happened..... At least this is a simple and cheap suggestion....! Good luck / Magnus Pete Fagg <> skrev i diskussionsgruppsmeddelandet:3b6addf4$0$3759$ > Have just replaced the Dump valve on my 89 900T16, the old one was just a > huge vac leak. Pretty sure I got it in the right way round and all but I'm > getting the Check engine light flash up when I lift off from Boost. > > Idle had been set up with the leaky valve so it may be that the mixtures are > now way out. > > > Can anyone clarify. > > > Many thanks > > Peat > > > >

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]