The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!
Date: Sat, 11 Aug 2001 23:50:28 +0100
From: "SimonJ" <menopsam.com>
Subject: Re: Removing a jammed sump plug from an OG 900


"Dean Malandris" <rootnopsamus-technologies.com> wrote in message news:3b754a0c.5422532nopsam.zip.com.au... > Plug won't come out - putting the 13mm single hex socket on resulted > in the corners rounding - have managed to hammer on a 12mm single hex > but although it's finger snug, turning it with a ratchet instantly > strips the corners so again, no good. > > I was thinking of welding the 12mmm socket to the plug washer face so > I can get it off with the 1/2" drive. > > Any suggestions? I don't want to damage the sump. Get a large nut and weld the inside of the nut to the sump plug, then remove with a large spanner.socket etc.

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]