Date: Sat, 11 Aug 2001 20:14:20 GMT From: "Familjen Dahlberg" <5xdahlbergnopsama.com> Subject: SV: Removing a jammed sump plug from an OG 900
I also vote for the pipe wrench. If it doesnĄt come loose with a tool like that - IĄm not sure it would come off with an on-welded socket! /Magnus Woolfie <john_woolfnopsamamhotmail.com> skrev i diskussionsgruppsmeddelandet:hKed7.20429$tq.2203071nopsam6-win.server.ntlworl d.com... > How about a pipe wrench - they hold tighter the harder you pull. They've > helped me out a few times on rounded-off nuts & bolts. > > > > "Dean Malandris" <rootnopsamus-technologies.com> wrote in message > news:3b754a0c.5422532nopsam.zip.com.au... > > Plug won't come out - putting the 13mm single hex socket on resulted > > in the corners rounding - have managed to hammer on a 12mm single hex > > but although it's finger snug, turning it with a ratchet instantly > > strips the corners so again, no good. > > > > I was thinking of welding the 12mmm socket to the plug washer face so > > I can get it off with the 1/2" drive. > > > > Any suggestions? I don't want to damage the sump. > >
 |
 |
 |
 |
 |
